Webinar recording - Config Tool

Tekron's Quentin Griffiths runs a webinar on the use of our Config Tool, in this case alongside an NTS03G+.

Running time 45 minutes

For more about the NTS03G+ click here

To get in touch about the config tool or with any questions click here - ask for Quentin!

IRIG-B Fiber Master/Slave Clock

Tekron was approached by a key US customer who required a GPS signal to be transmitted from the top of a mountain over 1.5 km’s of fiber to a GPS Clock located in a Control Room within the mountain. Tekron proposed a Fiber Master/Slave solution with the TTM 01-G to be installed on the mountain top to receive the GPS signal (Master unit) and then transmit an IRIG-B Time code over the fiber cable to the TCG 02-G GPS Clock in the Control Room which has a Fiber input in lieu of a GPS Antenna input (Slave unit). This simple cost effective model provided the customer with an ideal time synchronization solution.

2 3